|
| Site Partners: | SpotterGuides | Veloce Books |
| Related Sites: | Your Link Here |
|
|
|||||||||
|
||||||||||
|
|
|||||||||
|
||||||||||
|
|
22 Apr 2004, 22:23 (Ref:948377)
|
#1 | ||
|
Racer
Join Date: Dec 2002
Posts: 338
 |
brake materials & heat treatment
Hi all,
You may remember I am involved with a school designing and building a human powered vehicle that is to compete in a 24hr race. Currently we are thinking about brakes. One of the students has borrowed a brake disc and looking at it, we have the facilities to make something very similar. I am wondering if anyone has had experience making their own discs and what materials were they made from? Also did you have the discs heat treated in any way? Our vehicle is basically going to be light(around 100kg with rider) and speeds are supposed to be limited to 60km/h  so brakes do not have to be huge.Any info helpful Cheers Coln |
||
|
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees............... 
|
|
22 Apr 2004, 22:43 (Ref:948401)
|
#2 | ||
|
Veteran
Join Date: Feb 2000
Posts: 2,188
|
probably far too heavy and not very efficient for a human powered vehicle. Bicycle disc brakes would probably be more than adequate
|
||
|
|
__________________
A Saudi saying, "My father rode a camel. I drive a car. My son flies a jet-plane. His son will ride a camel."
|
|
23 Apr 2004, 00:24 (Ref:948456)
|
#3 | ||
|
Racer
Join Date: Dec 2002
Posts: 338
|
That is what we are basing our design on. The original is produced specifically for HPV vehicles but we cant afford/dont want to pay what they want for them.
|
||
|
|
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees...............
|
|
23 Apr 2004, 15:18 (Ref:949129)
|
#4 | ||
|
Veteran
Join Date: Dec 2001
Posts: 6,360
 |
As yours is only a very light duty application, mild steel will be adequate. Cast iron will give something like 20% higher coefficient of friction compared with MS, but unless you can cast your own you'd have to machine from a solid blank - it's filthy stuff to machine! If you're worried about MS looking tatty when it rusts you could use stainless, but the coefficient of friction would be lower.
Heat treatment is not necessary. |
||
|
|
__________________
Doing an important job doesn't make you an important person.
|
|
23 Apr 2004, 18:33 (Ref:949331)
|
#5 | ||
|
Veteran
Join Date: Jul 2002
Posts: 1,332
|
In fact, if you try to heat treat a disc similar to a bike design, you would probably end up warping the
 out of it! Also think carefully about any work you do to lighten it, I see a lot of horrendous brake design flaws on bicycle and motorcycle disks that sacrifice operating performance in the name of saving weight...
|
||
|
|
__________________
Juliette Bravo! Juliette Bravo!!!!
|
|
25 Apr 2004, 22:19 (Ref:951521)
|
#6 | ||
|
Racer
Join Date: Dec 2002
Posts: 338
|
Thanks for the info guys. I thought the cross drilling of the design we looked at was over the top for a bike. I felt that it would lead to locked wheels and flat tyres from the kids getting too aggressive under brakes.
|
||
|
|
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees...............
|
|
30 Apr 2004, 19:43 (Ref:957266)
|
#7 | ||
|
Rookie
Join Date: Dec 2003
Posts: 21
|
I am in the process of building car. For the brake discs I have water jet cut 5mm 304L stainless steel brakes discs.
Don't laugh, its the thickness and material used on many superbikes that are meant to stop a 275kg bike and rider from 160 mph. For your purposes try 3mm. Thats what's on my Honda CR250. |
||
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Materials | DanJR1 | Racing Technology | 22 | 5 Jun 2004 10:41 |
| Special treatment given to Renault by the FIA? | Jukebox | Formula One | 21 | 23 Apr 2003 14:59 |
| How long before Spa and Monza get the 'new Hockenheim' treatment? | Yoong Montoya | Formula One | 28 | 30 Jul 2002 09:30 |
| Materials | Rhonn | Racing Technology | 5 | 12 Dec 2001 16:29 |
| DC blames Gene and unfair treatment | Ed-f1 | Formula One | 14 | 23 Aug 2000 01:05 |
Linear Mode
