Tatuus Formula Renault 2.0 Technical Info Needed - and Greetings again

[gtanky]

Not my first post but as I havn't logged on for a long time Ive had to re-register - so hello to all once again.

I thought I'd post this in the Hillclimb section as I know there are a few of you out there competing on the French hills in FR 2.0's.
I'm currently in the design process of a motorcylce powered FR 2.0 converted for hillclimbing use here in the Channel Islands but I'm desparetly in need of info - pretty please

Despite lots of googleing I cant seem to find much in the way of technical information of FR's, the tatuus website lacks any kind of setup data or chassis dimensions or cad drawings etc.

Im particularly after chassis dimensions, most importantly is the dimension of the front wheel center line to the rear of the carbon tub.

Perhaps someone would be willing to take a few measurements for me from their own car if I give them a sheet of the measurements I'm after?

Also, id be interested to know what the main differnces are between years, is it mostly bodywork and aero changes or are other things change too like wishbone length (i.e track width) or updtaes to the carbon tub?

I really dont have a lot to go on so any help on offer I'd be eternally grateful to receive!

Cheers

Tanky

[gtanky]

initially, im after these measurements please folks.

A - rear wheel center line to tub face
B - front wheel center line to rear of tub face
C - tub face width
D - tub face height

[gtanky]

All sorted now thanks Andy