Lola T640 Setup Information needed

[Fprodget]

I just bought a Lola T640 here in the US and need some baseline suspension set up information...ride height, castor, camber, toe and spring rates. With the club we race with here in the US, we use a hard spec tire that shluld work much like the treaded tires in the UK.

Thanks in advance for your help,

[Fprodget]

No T640 series cars out there??

Is there another forum that would get me in contact with other T640 owners?

Thanks in advance for any help,

[Barry Pomfret]

Contact Chris Fox, tel +44 (0)1487832474

[Lola]

Camber 1 1/4 - 1 1/2 deg front
1 1/2 deg Rear

Castor 3 3/4 - 4 1/4 front
0 Rear

Bump Steer Zero



Toe in 1/16 Front
1/8 Rear (1/16 for Snetterton)



Ride height 40mm Front bulkhead
48mm Below roll hoop


That was a Lola T642e running in Monoposto on slicks .

[Fprodget]

Thanks Barry and Lola. That will get me started. I did get in touch Chris Fox today and he sent me a sheet from Lola for a T642 in the US. It was quite different from the setttings Lola published.

Best regards,

[bigbrowndog]

Originally Posted by Fprodget

Thanks Barry and Lola. That will get me started. I did get in touch Chris Fox today and he sent me a sheet from Lola for a T642 in the US. It was quite different from the setttings Lola published.

Best regards,

Do you still have the sheet? I would be interested in seeing it..

Thx

Ty