|
| Site Partners: | SpotterGuides | Veloce Books |
| Related Sites: | Your Link Here |
|
|
|||||||||
|
||||||||||
|
|
|||||||||
|
||||||||||
|
|
22 Sep 2010, 20:51 (Ref:2763244)
|
#1 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
 |
ROLLING ROAD SUN/MAHA RAM ROAD A MATCI X11 2WD
ROLLING ROAD SUN/MAHA RAM X11 2WD
i have one of these rolling road , all set up with power plot as the computer is some old very old pc27e card in side the pc is very very old ok now one day i was moving then computer get clean it out as it was very dirty and there a 37 pin D plug on the back of the computer and connected to the PC27E card will i pulled out the wires there 3 wires from the rolling road one is yellow the other red and blue i have try putting the wire in crasy places and get nothing i am looking for the info on how to wire this up so the computer is back working so 37 d plug connected to 3 wires via the rolling road need help as i got then info on the card and still have no idea just wire / 3 yellow looks to me like analog ground please help thanks a await your message p.s if anyone have one i can ring and ask feel free to drop me a pM |
|
|
|
|
23 Sep 2010, 12:59 (Ref:2763517)
|
#2 | |
|
Veteran
Join Date: Jul 2005
Posts: 1,981
|
I would look for the pins on the plug that show evidence of the wires having been ripped off.
Then, this may help: http://www.amplicon.co.uk/manuals/pc27e.pdf If you are right about the yellow wire being analogue ground, it should go to pin 3. I would take a guess that the other two wires are channel 0 and channel 1, so pins 4 and 5. But that is simply a guess as I have no way of knowing how the board channels have been programmed. If the evidence from inspection of the plug is that two pins other than 4 and 5 originally had connections to them, try with red on one and blue on the other. If that doesn't work, swap them round. I am assuming that the computer needs two analogue signals - one for drum RPM and one for load - but I could be completely wrong about that too! Last edited by phoenix; 23 Sep 2010 at 13:13. |
|
|
|
|
|
23 Sep 2010, 19:28 (Ref:2763687)
|
#3 | ||
|
Racer
Join Date: Dec 2005
Posts: 188
|
My pal used to be a Sun field engineer on RAM series rolling roads, and another pal has what I seem to remember as a RAM 11 or 12 currently installed. Send me your e-mail details to chris@chriswilson.tv and I'll get back to you with contact details for him. Are you in the UK?
|
||
|
|
__________________
Best regards, Chris Wilson
|
|
23 Sep 2010, 21:15 (Ref:2763739)
|
#4 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
|
right i tryed that way round on the card and it did kinda read but all over the place ........
there was no way of seeing where the wires was from it kinda mad i did have the pc27e diagram and had a look and kinda got pin 3 to be right but it still all over the place on reading |
|
|
|
|
|
26 Sep 2010, 10:16 (Ref:2764637)
|
#5 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
|
can anyone advice on what other software would work with then sun 12 and it at the right cash to set up as i think this one is very old win 98 and stuff please anyone help on know what is the best software to work with my rolling road run 12
thanks |
|
|
|
|
|
26 Sep 2010, 10:45 (Ref:2764639)
|
#6 | |
|
Veteran
Join Date: Jul 2005
Posts: 1,981
|
Apparently there is some alternative software - Piper CD 2000 ID DARR
Take a look here: http://cgi.ebay.co.uk/Rolling-Road-D...-/290475838146 At the bottom, the guy says call him for info about the software which is available seperately: http://www.piperdynamometers.com/rolling.htm |
|
|
|
|
|
26 Sep 2010, 14:49 (Ref:2764830)
|
#7 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
|
yes i have seen that but im sure there gotta be onm the internet for me to try i have sene that site on ebay and did google it
thanks anyway any more ideas gimme a shout |
|
|
|
|
|
26 Sep 2010, 14:57 (Ref:2764837)
|
#8 | ||
|
Veteran
Join Date: Jul 2005
Posts: 1,981
|
Quote:
|
||
|
|
|
|
26 Sep 2010, 21:56 (Ref:2765129)
|
#9 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
|
sorry my keyboard was playing up
 ok i have seen that ebay ad about then with my rolling road and the piper software i was asking is there anywhere to get a demo if the software or somthing to try it i am still looking for a system to work with my sun 12 any advice would be cool |
|
|
|
|
|
26 Sep 2010, 22:06 (Ref:2765133)
|
#10 | ||
|
Veteran
Join Date: Jul 2005
Posts: 1,981
|
Quote:
Tel: +44 1233 720130 OR Speak to Simon on +44 7976 736 689 |
||
|
|
|
|
27 Sep 2010, 21:23 (Ref:2765757)
|
#11 | |
|
Rookie
Join Date: Sep 2010
Posts: 6
|
that dont do upgrade sysytems now but it was wortha try
thanks any more ideas |
|
|
|
|
|
26 Apr 2012, 01:52 (Ref:3065650)
|
#12 | |
|
Rookie
Join Date: Apr 2012
Posts: 1
|
I know this is an old post now, but i have the connection information that may help (if you still want it)
cheers |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Advice needed,rolling road problem | Copperbottom | Racers Forum | 22 | 27 Apr 2010 11:14 |
| ROLLING ROAD SUN/MAHA RAM X11 2WD | the-enginetuner | Racing Technology | 2 | 10 Oct 2009 22:48 |
| rolling road tuning | lynx ae | Racers Forum | 23 | 27 Feb 2009 11:18 |
| Rolling Road Reccomendation | Dan Friel | Racing Technology | 10 | 11 Aug 2003 12:04 |
| Rolling road results | spanner | Road Car Forum | 7 | 24 Jun 2003 00:13 |
Linear Mode
