|
||||||||||
|
||||||||||
|
18 Apr 2005, 08:22 (Ref:1280962) | #1 | ||
Racer
Join Date: Feb 2003
Posts: 161
|
Catch tank regs and scrutineer's?
Hi all
Just after a quick bit of advice. I'm moving away from my closed breather system to a catch tank and was wondering what the minimum MSA requirement was. I know about the 1litre minmum capacity but was wondering if it mattered what material the tank has to be made of? (can't see anything in the blue book) I am currently using a 1l hard plastic bottle (old brake fluid container) as a catch tank, it is firmly mounted and does the job very well. In my old bike racing days this would have been fine, but I am not sure what the scrutineer's would make of it? would this be accepted? or do I have to splash out on a ali catch tank? Thanks in advance for any pointers Cheers Rob |
||
|
18 Apr 2005, 11:30 (Ref:1281131) | #2 | ||
Veteran
Join Date: Jan 2003
Posts: 2,071
|
i've used all sorts of things as catch tanks, the main requirement is that you can easily check to see how much is in them, and how big they are, they need to be 2 litres min for engines upto 2000cc and 3 litre min engines over 2000cc
|
||
|
18 Apr 2005, 12:34 (Ref:1281192) | #3 | ||
Veteran
Join Date: May 2000
Posts: 4,380
|
I think the only rules applied really are common sense rules. i.e. Better to use 'rigid' plastics, rather than soft (food use) ones, make sure the oil doesn't corrode the plastic and put a hole through it (seen that done!), and make sure it will hold enough oil for your length of race. Also make sure it's mounted securely.
Couple of years back I used a windscreen washer bottle from a smaller car, mounted on the front inner wing. Sadly at Cadwell Park it got rather full, and then emptied some of its contents on to the front wheel. Oh what a laugh that was as I skated over the grass at the Mountain Winscreen washer bottles are quite popular, as they're resitant to quite a few oils and solvents, are rigid, and have appropriate mounting points. Some are also quite capacious. Also, if you're not worried about washing your windscreen during the race, or passing an MOT, you can use the one that came with your car Other things to consider are an easy way to empty it/return the contents to the sump. Some of the more professional tanks have a return line back to the sump fitted with a tap. Make sure you vent the tank in a safe way too - as you want the fumes to escape, but not the oil, so you really need the pipe coming in at the top and well secured, but you also need vents in the top to let the waste gasses out. |
||
__________________
This planet is mildly noted for its hoopy casinos. |
18 Apr 2005, 16:14 (Ref:1281392) | #4 | ||
Racer
Join Date: Aug 2001
Posts: 221
|
I'd second the washer bottle, mine happens to hold 2 litres and is sort of see through, I just have a hose running from my rocker cover in the the top opening in the container with a little clearance around the hose to let the gas out.
I've not yet had a scruitineer complain about it in the last 5 years (but theres always a first time ) Most other folks on a budget in the paddock seem to have similar solutions. |
||
|
20 Apr 2005, 16:17 (Ref:1283113) | #5 | |
Veteran
Join Date: Apr 2002
Posts: 9,718
|
I use a pushbike water bottle and cradle screwed to the inner wing, it weighs nothing, is easily removed and emptied, holds a litre, is securely mounted and up to the job and cost only £2.99 . . . . I know it makes sense !
|
|
|
21 Apr 2005, 08:08 (Ref:1283597) | #6 | |||
Veteran
Join Date: Jan 2003
Posts: 2,071
|
Quote:
|
|||
|
21 Apr 2005, 12:07 (Ref:1283791) | #7 | ||
Veteran
Join Date: Apr 2002
Posts: 9,718
|
Quote:
my engine doesnt breath anything much anyway the only time the catch tank filled up is when I put a rod through the block and the coolant displaced the oil |
||
|
23 Apr 2005, 12:49 (Ref:1285051) | #8 | ||
Veteran
Join Date: Jan 2003
Posts: 2,071
|
zef
you must have a very small sump then, most hold 4-5 litres of oil Last edited by graham bahr; 23 Apr 2005 at 12:51. |
||
|
23 Apr 2005, 14:06 (Ref:1285091) | #9 | |||
Race Official
Veteran
Join Date: May 2003
Posts: 11,143
|
Quote:
|
|||
|
20 Apr 2005, 17:19 (Ref:1283178) | #10 | |||
Racer
Join Date: Oct 2002
Posts: 254
|
Quote:
|
|||
|
20 Apr 2005, 21:30 (Ref:1283355) | #11 | ||
Veteran
Join Date: Mar 2003
Posts: 3,523
|
I'm going through similar thoughts.
I have a dry sump system, and I'm running the rocker cover breathers back to the oil tank, then a breather from the oil tank to a catch tank. Lots of nice shiny aeroquip (and damned expensive fittings!). The catch tank, which will act as nothing more than a vapour trap, will be be a former washer bottle, which thankfully holds 3L to complement the 6.6L engine. Another query on the same subject - diameter/bore of the pipework - what would you consider a minumum? I'm using -12AN for most of it. Rob. |
||
__________________
There is no substitute for cubic inches. Harry Belamonte - 403ci Vauxhall Belmont!! A 700hp wayward shopping trolley on steroids!! |
21 Apr 2005, 00:51 (Ref:1283472) | #12 | ||
Racer
Join Date: Dec 2002
Posts: 338
|
Good question. My old man used tubing which was too small and blew the dip stick out of his motor...............
|
||
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees............... |
21 Apr 2005, 08:13 (Ref:1283601) | #13 | ||
Veteran
Join Date: May 2000
Posts: 4,380
|
Dunno what size mine is. I just call it the "F'in Large Pipe"
The problem with my engine (and similar ones) is that they breathe quite heavily, even when freshly rebuilt. One of the breathers is quite low down in the sump, so gets a lot of oil thrown at it. So, I have a complicated 'expansion tank' idea, just above the oil filler pipe (which leads to the gearbox side of the sump). This enables the oil to shoot up under heavy load, and hopefully return to the sump in 'quieter' moments There's a pipe at the top of that leading to the catch tank. The expansion tank is another washer bottle - from a Furred Fester I think. |
||
__________________
This planet is mildly noted for its hoopy casinos. |
21 Apr 2005, 08:47 (Ref:1283619) | #14 | ||
Racer
Join Date: Jun 2002
Posts: 470
|
Hm, interesting. My current engine breathes back into the carbs (as the original car did), previous engines I've had set up breathing into catch tanks etc.
This wasn't really a concious choice, but it came back from the engine builders like that and gave more power than the previous one on the rollers, so I've left it. Is there a compelling reason why I should change back to breathing into a catch tank? |
||
__________________
The wonderful dexterity of Hannu Mikkola, makes me want to shake hands with the whole of Finland. (Architecture And Morality, Ted And Alice - Half Man Half Biscuit) |
21 Apr 2005, 09:06 (Ref:1283631) | #15 | |||
Veteran
Join Date: Oct 2003
Posts: 871
|
Quote:
|
|||
|
21 Apr 2005, 10:13 (Ref:1283699) | #16 | |||
Racer
Join Date: Jun 2002
Posts: 470
|
Quote:
|
|||
__________________
The wonderful dexterity of Hannu Mikkola, makes me want to shake hands with the whole of Finland. (Architecture And Morality, Ted And Alice - Half Man Half Biscuit) |
23 Apr 2005, 06:58 (Ref:1284888) | #17 | |||
The Honourable Mallett
20KPINAL
Join Date: Feb 1999
Posts: 37,573
|
Quote:
First thing to do with those systems is to put in a catch tank and block the oil breather into the carb. |
|||
__________________
I've decided to stop reaching out to people. I'm just going to contact them instead. |
21 Apr 2005, 09:26 (Ref:1283658) | #18 | ||
Racer
Join Date: Feb 2004
Posts: 146
|
For hill climb and sprint cars I think the min size is 1 litre
Lister |
||
__________________
Rattie,on the road with Mole.Beep,beep! |
21 Apr 2005, 12:29 (Ref:1283807) | #19 | ||
Racer
Join Date: Feb 2003
Posts: 161
|
Thanks for all the replys.
You had me worried for a second regarding sizes, but it looks like the racing vs hill climb/spring regs are different and I only need 1ltr for sprinting. Looks like the only issue I have is that you can't see the level, unless you count removing the hose to see if its showing on there. Hummm...what to do...might have to go the bike bottle route (nice and cheap, spent enough on the dam car this spring!) |
||
|
21 Apr 2005, 14:38 (Ref:1283880) | #20 | |
Racer
Join Date: Jan 2004
Posts: 410
|
Never had problem with just looking in the top after pulling hose out of an opaque tank. As you have independently established after a lot of well meaning but conflicting information, min capacity for speed events is different from racing. Some racing orientated scrutineers have had to be reminded at speed events that the regs are different. Sometimes wonder why they turn up when vehicle eligibility in speed events never seems to be challenged and so many react adversely to the simplest of queries aimed at merely establishing a level playing field!
|
|
|
21 Apr 2005, 14:45 (Ref:1283884) | #21 | ||
Racer
Join Date: Feb 2003
Posts: 161
|
Valid point, I might make up a "dip stick" for it can't argue with that...can they As it is the engine doesn't blow anything out (odd for a K I know)
|
||
|
22 Apr 2005, 10:49 (Ref:1284477) | #22 | |
Veteran
Join Date: Apr 2002
Posts: 9,718
|
I've found on the Kent engines (pre or crossflow) the breathing is entirely down to where you put the breather . . .sometimes it pours out sometimes its virtually nothing other than a bit of vapour and steam if its been sitting for a few weeks
|
|
|
23 Apr 2005, 14:43 (Ref:1285138) | #23 | ||
Veteran
Join Date: Jan 2003
Posts: 2,071
|
well yours is a little on the large side............
Last edited by graham bahr; 23 Apr 2005 at 14:43. |
||
|
24 Apr 2005, 16:53 (Ref:1285979) | #24 | ||
Race Official
Veteran
Join Date: May 2003
Posts: 11,143
|
I suppose the 3 or 4 gallons of water to keep it cool don't do a lot for stability
|
||
|
24 Apr 2005, 19:16 (Ref:1286127) | #25 | |||
Veteran
Join Date: Jan 2003
Posts: 2,071
|
Quote:
|
|||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel tank advice? | daj | Historic Racing Today | 8 | 6 Feb 2006 11:59 |
fuel swirl tank for gt4 | jonchurch | Racing Technology | 5 | 21 Dec 2005 02:47 |
Identity of a Yank Tank | pvmw | Road Car Forum | 4 | 23 Mar 2004 20:12 |
'the tank' | Osella | Motorsport History | 5 | 3 Feb 2003 09:02 |
Tank slappers | Lorna | Racing Technology | 32 | 24 Nov 2000 12:37 |