|
||||||||||
|
||||||||||
22 Jan 2021, 14:30 (Ref:4030675) | #1 | ||
Veteran
Join Date: Dec 2006
Posts: 8,951
|
Audi R10 (or other LMP or GT) cassette type gearbox
I've been watching some videos on YouTube about the 2006 24 Hours of Le Mans (which I also watched live) and they did a gear cluster change on the #8 Audi in about 8 minutes (a bit longer if you add the normal servicing they did to the car). I had also read in a Car and Driver article on the R10 from earlier in 2006 that the R10 used a cassette type gearbox to combat the ACO's restrictions on quick change rear ends like what the R8 used.
Of course, I'm wondering how a cassette type assembly works, and namely, how one would work that doesn't require removal of the gearbox casing from the car. I know that on other cars the gearbox casing would have to be removed to access the transmission/diff gear clusters. But on the R10, they were able to change those parts with the gearbox in situ and still attached to the car. And are there other examples of this on more recent LMP or GT cars? |
||
__________________
Power to me is having the ability to make a change in a positive way. Don't dream it, be it. |
3 Feb 2021, 23:12 (Ref:4033339) | #2 | |
Racer
Join Date: Aug 2019
Posts: 282
|
Cassette boxes have been commonplace on racing bikes for decades, it simply means on those, you can remove the cluster without having to remove a gearbox, or in a small capacity class like 125 or 250, the entire engine as on bikes the engine and box are like a Mini, all one unit.
|
|
|
4 Feb 2021, 16:09 (Ref:4033475) | #3 | ||
Veteran
Join Date: Jan 2006
Posts: 4,857
|
Hello Mr Chernaudi.
For once i can be a help to this forum. A cassette type gearbox just means that the internals of the gearbox are one unit and can be removed from the gearbox casing without having to remove the gearbox from the car. Ideal for ratio changes and gearbox issues. You end up with something like this. I think most prototypes, single seaters and GT cars use this approach now because you cant change the gearbox casing in most series but most series will allow you to change the internals. Infact, im sure we saw this a couple of times in last weekends Daytona 24 hours. |
||
|
7 Feb 2021, 00:43 (Ref:4033786) | #4 | ||
Veteran
Join Date: Dec 2006
Posts: 8,951
|
I wonder how they did this on the R10 for example, since it has the differential behind the transmission section of the transaxle?
|
||
__________________
Power to me is having the ability to make a change in a positive way. Don't dream it, be it. |
17 Feb 2021, 23:04 (Ref:4035631) | #5 | ||
Racer
Join Date: Aug 2003
Posts: 295
|
I havent seen the car in question but you could have the cassette come out the side of the gearbox housing.
Last edited by Tony C; 17 Feb 2021 at 23:11. |
||
|
21 Feb 2021, 19:32 (Ref:4036222) | #6 | ||
Veteran
Join Date: Dec 2006
Posts: 8,951
|
That works fine on a transverse gearbox, but the R10 (as far as I know) used a longitudinal gearbox with the diff behind the transmission assembly.
Would what you pointed out work on such a longitudinal gearbox? |
||
__________________
Power to me is having the ability to make a change in a positive way. Don't dream it, be it. |
22 Feb 2021, 02:17 (Ref:4036253) | #7 | ||
Veteran
Join Date: Dec 2006
Posts: 8,951
|
|||
__________________
Power to me is having the ability to make a change in a positive way. Don't dream it, be it. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Audi R8/Bentley Speed 8 vs Audi R10/R15 oil sump tank placement. | chernaudi | Racing Technology | 5 | 9 Apr 2010 22:25 |
Radiator type oil coolers vs Laminar oil/water heat exchanger type.. | Zico | Racing Technology | 3 | 2 Sep 2008 20:46 |
Audi R10 | gwyllion | Sportscar & GT Racing | 818 | 7 May 2008 13:57 |
Audi R10 launch report - on the radio tonight or on demand | hindy | Sportscar & GT Racing | 5 | 17 Dec 2005 11:41 |
Wings (aerodynamic type, not the feathered type) | RobC | Racing Technology | 2 | 19 Nov 2005 23:28 |