|
||||||||||
|
||||||||||
6 Mar 2013, 22:23 (Ref:3215295) | #2751 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Veteran
Join Date: Mar 2004
Posts: 8,738
|
The numbers in appendix B have also changed from draft 4 to 5.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
6 Mar 2013, 22:39 (Ref:3215301) | #2752 | ||
Veteran
Join Date: Feb 2013
Posts: 2,132
|
I am still intrigued by the new torque metering provision. What does the ACO-FIA want to achieve by measuring torque at the output of the power unit ? Close a loophole of some sort ?
|
||
__________________
In order to finish first, first you have to finish |
7 Mar 2013, 07:22 (Ref:3215406) | #2753 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
The wording is tricky, but is it confirmed that the fins have to stay the same as they are now? No 'sloping' fins to the rear wing?
|
|
|
7 Mar 2013, 08:38 (Ref:3215428) | #2754 | |
Veteran
Join Date: Mar 2004
Posts: 8,738
|
Just another input for their logging box. As deggis suggests, this is probably just another parameter for the ACO/FIA to balance performance between the different powertrain options.
|
|
|
7 Mar 2013, 08:59 (Ref:3215432) | #2755 | ||
Veteran
Join Date: Feb 2013
Posts: 2,132
|
So torque output is going to become a BoP parameter ? Thought the new regulations were supposed to put emphasis on energy usage efficiency
|
||
__________________
In order to finish first, first you have to finish |
7 Mar 2013, 09:00 (Ref:3215433) | #2756 | ||
Veteran
Join Date: Mar 2002
Posts: 4,354
|
I don't understand in the drive for efficiency why the ACO doesn't set a much lower weight limit to challenge the engineers to find efficient construction solutions as well as engine tech.
|
||
|
7 Mar 2013, 09:15 (Ref:3215438) | #2757 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
I feel the same way. Even 800kg is a big difference. -30kg to 870kg? Half that is the disparity between some drivers!
|
|
|
7 Mar 2013, 09:25 (Ref:3215440) | #2758 | |||
Veteran
Join Date: Feb 2013
Posts: 2,132
|
Quote:
Weight limits that are closer to 900-1000kg are also more "relevant" to actual production cars. Would a 500-600kg chassis be more relevant ? |
|||
__________________
In order to finish first, first you have to finish |
7 Mar 2013, 09:30 (Ref:3215443) | #2759 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
Yes. These prototypes are much lower than road cars. Also less complex and luxurious. 800kg would have been ideal IMO. Only 100kg less than where they are now. They had LMP2's running 5 years ago weighing less than that.
|
|
|
7 Mar 2013, 09:51 (Ref:3215454) | #2760 | ||
Veteran
Join Date: Mar 2004
Posts: 8,738
|
Quote:
Of course privateers will like return to bigger and therefor heavier engines, but the narrower car and tyres will automatically decrease the weight. I agree that the minimum weight numbers for 2014 are disappointing, especially because at one point some manufacturers were pushing for 775 kg. |
||
|
7 Mar 2013, 09:58 (Ref:3215456) | #2761 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
The older LMP2 HPD's and Porsche's which were running in ALMS were at or around that weight against Audi.
|
|
|
7 Mar 2013, 11:41 (Ref:3215492) | #2762 | |
Veteran
Join Date: Jan 2008
Posts: 6,232
|
I guess absolutely thinking 1 kg more makes them more relevant to road cars, but then when you consider the difference in materials, constructions and other requirements (is luggage space now in the rules?)... yeah, still pretty and almost as irrelevant.
|
|
|
7 Mar 2013, 11:59 (Ref:3215501) | #2763 | ||
Veteran
Join Date: Feb 2013
Posts: 2,132
|
|||
__________________
In order to finish first, first you have to finish |
7 Mar 2013, 12:39 (Ref:3215523) | #2764 | ||
Veteran
Join Date: Aug 2007
Posts: 4,476
|
Presumably these cars have to be ballasted up to the minimum weight limit, which means having lumps of lead or something squirrelled away in the chassis. It must break an engineers heart to have to do it.
Heavier cars also have bigger accidents. Momentum = mass x velocity. If a car with ballast can pass a crash test, then a car without ballast can as well. Raising the minimum weight limit seems a strange thing to do. |
||
|
7 Mar 2013, 12:45 (Ref:3215532) | #2765 | |
Veteran
Join Date: Jul 2011
Posts: 1,648
|
I wonder how much of it is to keep the cars at a reasonable speed?
I'm especially thinking of the Porsche Curves. LMP1s gobble up GT cars like a Pacman in the Porsche Curves. Imagine how much worse it will be if they only weighed 800kgs instead of 870kgs? |
|
|
7 Mar 2013, 22:16 (Ref:3215756) | #2766 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
Less weight = less distance in braking and more maneuverability. That would mean they could slow down faster and easier, and also move through traffic better since they're more nimble. In ALMS a few years ago, they had LMP2 cars weighing 775kg for the Porsche RS spyder, with a little power help it was able to hang with the Audi R10, even beat them occasionally.
|
|
|
7 Mar 2013, 22:59 (Ref:3215783) | #2767 | ||
Veteran
Join Date: Feb 2010
Posts: 602
|
Quote:
Man if that wasn't some excellent racing for as long as it lasted. |
||
|
7 Mar 2013, 23:36 (Ref:3215795) | #2768 | |
Veteran
Join Date: Jul 2011
Posts: 1,648
|
What is amazing is that in 2008, and LMP2 car qualified at a 3:32 at Le Mans!
|
|
|
9 Mar 2013, 16:01 (Ref:3216398) | #2769 | ||
Veteran
Join Date: Nov 2006
Posts: 8,919
|
|||
__________________
Probae esti in segetem sunt deteriorem datae fruges, tamen ipsae suaptae enitent |
9 Mar 2013, 16:47 (Ref:3216407) | #2770 | |
Veteran
Join Date: Jan 2003
Posts: 3,795
|
More like the end of racing.
I don't understand people that get excited about electrical cars...the day the sound is gone from racing is the day I'm done with it...sorry. |
|
|
10 Mar 2013, 00:58 (Ref:3216547) | #2771 | ||
Veteran
Join Date: Mar 2009
Posts: 3,884
|
Absolutely agree. You wouldn't take 'sight' away from racing, but for some reason the next sense 'sound' is not considered important to a number of important people. The noise - and I mean that word - is part of the product motorsport sells.
I sincerely hope that Drayson's comments about this being the sound of the future look silly in years to come. |
||
|
10 Mar 2013, 02:19 (Ref:3216561) | #2772 | |||
Veteran
Join Date: Oct 2002
Posts: 6,958
|
Quote:
|
|||
|
10 Mar 2013, 02:20 (Ref:3216562) | #2773 | |||
Veteran
Join Date: Oct 2002
Posts: 6,958
|
Quote:
Not just the sound, but the smell too... but yes, the sound is more important. I'm not a fan of watching life size "slot cars" driving around a race track. Last edited by Fogelhund; 10 Mar 2013 at 02:26. |
|||
|
10 Mar 2013, 06:54 (Ref:3216592) | #2774 | |
Veteran
Join Date: Sep 2010
Posts: 15,605
|
||
|
10 Mar 2013, 07:12 (Ref:3216593) | #2775 | |||
Veteran
Join Date: Feb 2007
Posts: 4,642
|
Quote:
|
|||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[WEC] Glickenhaus Hypercar | Akrapovic | ACO Regulated Series | 1603 | 12 Apr 2024 21:24 |
[WEC] Aston Martin Hypercar Discussion | deggis | ACO Regulated Series | 175 | 23 Feb 2020 03:37 |
[WEC] SCG 007: Glickenhaus Le Mans LMP1 Hypercar | Bentley03 | ACO Regulated Series | 26 | 16 Nov 2018 02:35 |
ALMS Extends LMP Regulations | tblincoe | North American Racing | 33 | 26 Aug 2005 15:03 |
[LM24] Whats the future of LMP's at Le Mans?? | Garrett | 24 Heures du Mans | 59 | 8 Jul 2004 15:15 |