|
|||||||||||
|
|||||||||||
26 Feb 2006, 16:04 (Ref:1531920) | #1 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
Volvo 122 amazon
i have found one! in great shape (needs paint) runs new breaks and freshened motor- new cylinders for the driveline...
for a great price, now- i love this car always have but should i go into the money pit? i envision fun projects and a vintage racer maybe thought s on the cars reputations or good racing supply house- i have searched the internet and it s not the hottest volvo around (if there are 'hot ones') |
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
3 Mar 2006, 13:09 (Ref:1535415) | #2 | ||
Ten-Tenths Hall of Fame
Veteran
Join Date: Nov 1999
Posts: 3,797
|
I wouldn't have thought it would be too difficult to source tuning parts for the B18 Amazon. There are hordes of them still in classic rallying and they've even had their fair share of circuit racing. Ruddspeed were tuning them way back in 1961 if I remember rightly.
My one overriding memory of driving them is that the dashboard was very high and a sagging driver's seat resulted in me having to peer out from under the steering wheel to see out. |
||
|
4 Mar 2006, 06:07 (Ref:1535906) | #3 | ||
Veteran
Join Date: May 2004
Posts: 2,540
|
I think they are great cars, go for it
|
||
|
5 Mar 2006, 18:12 (Ref:1536814) | #4 | ||
The Honourable Mallett
20KPINAL
Join Date: Feb 1999
Posts: 37,687
|
Basic mechanicals. However be wary of bodywork. Engines are cheap compared to structure.
|
||
__________________
I've decided to stop reaching out to people. I'm just going to contact them instead. |
22 Mar 2006, 17:43 (Ref:1557612) | #5 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
Yup
the floor boards have abit of daylight- but other wise its a good one. I have it running or painfully lugging itself about. its fun, sagging seats were fixed by the last owner. I have been searching but have not found any good photos of a proper Rally or factory racers(a ruddspeed version might be neat too) as I would like to make it as historically acurate to the factory types as i can...Any ideas? |
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
24 Mar 2006, 06:20 (Ref:1559355) | #6 | ||
Veteran
Join Date: May 2004
Posts: 2,540
|
You could try contacting Volvo - you never know! The "works rally car" books would likely include it too.
|
||
|
25 Mar 2006, 18:02 (Ref:1560437) | #7 | |||
Rookie
Join Date: Oct 2003
Posts: 22
|
Quote:
Volvo run these cars in SU forms B 18 up to 1966 From 1970 B 20 they had some factory cars with Webers and disc rear brakes Close ratio g.boxes for both types ,an overdrive g.box homolgated but only used in Spa /Liege rallies 4,1,/4,56 and 4,88 LSD for both types of cars. 70 litres fuel tank in both versions ,2 original tanks welded together !!! 5,5 by 15 inches wheels homologated. . |
|||
|
25 Mar 2006, 19:03 (Ref:1560457) | #8 | ||
Veteran
Join Date: Aug 2004
Posts: 14,699
|
My first proper car was a 122s and I have many fond memoiries of it, I gave it an engine rebuild as soon as I bought it (well actually got tucked up by a Hampstead Car dealer but managed to get the money out of im for the rebuild). It was a great car mine was the early 1600cc version with twin SU's but was very easy to maintain and looked classy in its day.
|
||
__________________
You can't polish a turd but you sure can sprinkle it with glitter! |
25 Mar 2006, 19:38 (Ref:1560476) | #9 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
1964 B18 with twin SU carbs rated at 100hp by the manual...
skinny tyres the lot. however, I will make it bigger- bore and Twin webers 42 DCOE. or get a B20 and the factory overdrive box. but other options have come up- a 2.5 crank and a bore to make it a square engine (92mmx92mm) 7.5K revs and alot more oomph... possible a 5 speed T9 gear box and discs allaround..(i would like it to LOOK like the factory racers, just be quicker... ) |
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
29 Mar 2006, 15:06 (Ref:1564232) | #10 | ||
Rookie
Join Date: Oct 2003
Posts: 22
|
Your B 18 from 64 has 90 BHP ,the P 1800 had 100 BHP
To convert to Webers on a RHD car you will have problems with the stearing column if my memorie serves me correct. You probably have to use the short inlet manifold from the P 1800 Weber kit I looked at the 2,5 kit in the States and it is nice but costly. A "cheaper" solution is to use Volvo B 21 crank ,B 230 rods ( 8000 RPM) VW forged pistons This will give you approx. 2300 cc on a B 20 block 2100 cc on a B 18 block .Volvo made a 2200 cc 180 BHP kit in the 1970 ! Use the Volvo M 46 overdrive g.Box from the 240 Turbo or the M 47 from the 940 god for 230 /240 BHP or even better the M 90 from later 940 and 960 ,5 speed gearboxes for up to 400 BHP Rear axle with disc from P 1800 ES 1970/72 will fit nearly without modifications . It will fit the 1967 122 S without any modification. |
||
|
29 Mar 2006, 15:23 (Ref:1564240) | #11 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
thanks alot for that info
are you a Volvo driver yourself...Te questions are swarming and I would like a nice brain to pick. |
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
30 Mar 2006, 01:25 (Ref:1564703) | #12 | ||
Rookie
Join Date: Oct 2003
Posts: 22
|
I have built a few Volvos over the years and rallied them even in the UK
I built the Volvo 142 for Tony Fall in 94(? )for his London Mexico rally 5th overall after a lot of problems. You can mail me on steinjohnsen@gmail.com and I can give you some more info on the 122 S |
||
|
8 Apr 2006, 20:04 (Ref:1574096) | #13 | ||
Veteran
Join Date: Aug 2004
Posts: 14,699
|
I see on the final instructions I have just received from Brands Hatch for the April 15th meeting Julius Thurgood (the main To Hat man) has entered a 122S in the Sebring race.
|
||
__________________
You can't polish a turd but you sure can sprinkle it with glitter! |
12 Apr 2006, 05:20 (Ref:1579154) | #14 | ||
Veteran
Join Date: May 2004
Posts: 2,540
|
I saw a nice original looking 122 on the way to work the other day. From the registration number it had been re-registered about 2 years ago & looked to have been restored (paint was too shiny to be original). At the same time someone was taking their 1966 Ford Galaxie to work.
|
||
|
22 Aug 2006, 23:46 (Ref:1689220) | #15 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
thanks all for the info-
Query- The B20 will cost$ 4500 in parts and $1800 (machining etc.) in labor if i build it myself that is a whopper of a price- and no transmission is included, or new rear. a new MX-5 or Rx8 (ROTARY !) i cna find with a trans (my girlfriend works at MAzdaUSA,) and slap thse in for much less than the aforementioned Volvo resurrection. what to do- dose authenticity matter- if the outside is the bit? or should i stay true? |
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
25 Apr 2010, 22:25 (Ref:2679648) | #16 | ||
Rookie
Join Date: Mar 2000
Posts: 40
|
Volvo 122s Restoration
I found my old race car rotting under a tree....
Volvos have many rust spots, but patch panels are available.... It cost a fortune to fix it, but I like the result.... Have fun!!! |
||
|
26 Apr 2010, 12:43 (Ref:2679898) | #17 | ||
Veteran
Join Date: Jan 2003
Posts: 4,536
|
What was or is it rotting away? Wow old threAd
|
||
__________________
SuperTrucks rule- end of story. Listen to my ramblings! Follow my twitter @davidAET I am shameless ... |
27 Apr 2010, 12:21 (Ref:2680487) | #18 | ||
Racer
Join Date: Aug 2003
Posts: 156
|
My better half owns & drives (daily!) a 1968 Volvo Amazon Estate (some of you may have already seen it at various race circuits!!). He gets lots of parts from the very helpful Simon at Brookhouse Volvo in Ipswich. FYI : http://www.classicvolvoparts.co.uk/ It's a wonderful car...very comfy & reliable!
|
||
|
27 Apr 2010, 21:06 (Ref:2680777) | #19 | ||
Racer
Join Date: Aug 2003
Posts: 156
|
If you're considering using an Amazon for competition work then my better half suggests you contact the people that are currently using them with great success in rallying, namely Rob & Emma at Amazon Cars. They have also been very helpful & like Stein have an in depth knowledge of these vehicles. FYI : http://www.amazoncars.co.uk/
|
||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Books] Amazon for books | cool man fan | Armchair Enthusiast | 6 | 24 Dec 2005 10:24 |
Volvo 03 | pink69 | Touring Car Racing | 12 | 27 Oct 2002 01:23 |
Volvo to run 3rd car. | Alfa Fan | Touring Car Racing | 6 | 8 Jun 2002 11:46 |
Volvo DTM | Erdosfreak | Touring Car Racing | 80 | 23 May 2002 13:29 |
[Books] Anyone used Amazon ? | fatbloke | Armchair Enthusiast | 10 | 26 Apr 2000 05:56 |