|
||||||||||
|
||||||||||
15 May 2019, 00:45 (Ref:3903824) | #1 | ||
Rookie
Join Date: May 2019
Posts: 9
|
Anyone have an idea who built this tub?
|
||
|
17 May 2019, 01:32 (Ref:3904256) | #2 | ||
Rookie
Join Date: May 2019
Posts: 9
|
|||
|
17 May 2019, 01:56 (Ref:3904258) | #3 | ||
Rookie
Join Date: May 2019
Posts: 9
|
OK so far we have chevron b 20 nose and wing/ wheels are 914/6 dan gurney wheels/ hubs and rotors that came with car appear to be 914 (not installed) found location for builder tag on left front of tub in front of gauge pod. rivits are there....... tag is gone. Main hoop and most of control arms are nickle plated . the inboard front shock mounting is very unique . Uprights may have been changed thru time possible rich lilly previous owner .
|
||
|
17 May 2019, 02:32 (Ref:3904262) | #4 | ||
Rookie
Join Date: May 2019
Posts: 9
|
I recently picked up this tub Seller claimed it was formula vee / as far as he knew. I bought it with some spares and have started the process of trying to figure out what it really is . The confusing part to me is the monocoque chassis. I cannot find any formula v or super vee with this design . The main hoop and much of the suspension arms are nickel plated , the tub is buck riveted together/front inner mounted shocks are dated 1971 decarbon shocks/ rears are also decarbon/bilstien . there was a builder tag on front left side of tub but it is gone . I did uncover a scca brass tag with "73fsv02" under roll bar padding
The car was abandoned with 2 other cars in a garage and the house was auctioned . 30 years ago. I bought it from the son of the buyer at the auction. no information is available about the previous owner . Open to ideas from the forum . thanks in advance more photos are available. |
||
|
23 May 2019, 21:37 (Ref:3905419) | #5 | ||
Rookie
Join Date: May 2019
Posts: 9
|
|||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
If You Have Ever Worked With or Built Touring Cars | SM Racing | Racing Technology | 4 | 10 May 2011 14:25 |
Silly Hats. Good idea/Bad idea? | Justin Moran | Marshals Forum | 79 | 24 Jul 2009 14:01 |
Could a chicane have been built safely? | NJDMONEY | Formula One | 42 | 22 Jun 2005 08:47 |
We have already built the best F1 engine and so our job is 90% done. | neilap | Formula One | 20 | 8 Jan 2003 17:50 |
The tub-within-a-tub | Franklin | Racing Technology | 4 | 12 Apr 2000 15:21 |