|
||||||||||
|
||||||||||
25 Jan 2003, 23:08 (Ref:485928) | #1 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
anyone got a modified car ?
what is it and what modifications has it got ?
eg, engine mods, bodywork, interior, stereo etc ? photos would be nice too (max 400x400). |
||
|
26 Jan 2003, 04:18 (Ref:486129) | #2 | ||
Veteran
Join Date: Feb 2002
Posts: 4,936
|
I've removed 20 pounds worth of bodywork from my car!
Well, okay, actually that was the salt that did that... |
||
__________________
"Put a ****ing wheel on there! Let me go out again!" -Gilles Villeneuve, Zandvoort, 1979 |
26 Jan 2003, 08:17 (Ref:486208) | #3 | ||
Racer
Join Date: Dec 2002
Posts: 338
|
1973 Corolla
1.5L motor (up from 1.2L) Factory twin carbs Biggish cam (8000rpm +. It goes off the tacho ) Extractors & 2" exhaust 4 speed locked 4.77 diff lowered and modified suspension stripped interior custom paint Shame its not registered |
||
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees............... |
30 Jan 2003, 09:51 (Ref:490331) | #4 | ||
Veteran
Join Date: Oct 2000
Posts: 3,366
|
Ford Fairmont - with added mods...
lambs wool seat covers bowls hat in rear parcel shelf thick lycra spongy steering wheel cover (don't ya just love the feel of lycra against naked skin?). |
||
__________________
I am grateful that I am not as judgemental as all those censorious, self-righteous people around me. |
30 Jan 2003, 11:46 (Ref:490453) | #5 | ||
Veteran
Join Date: Aug 2001
Posts: 565
|
Er...a few..
1995 FORD MUSTANG GTS MODIFICATIONS ENGINE WMS 306 block TRW forged pistons GT40P heads Crane Cobra 1.7 RR's Cobra intake FMS 65mm throttlebody 190lph + T-rex fuel pumps FMS 9mm wires battery re-located to trunk WMS/SDS DFI programmable engine management system 36lb injectors Crane Hi-6 ignition POWER ADDER 9 psi inter-cooled P600B Procharger supercharger DRIVETRAIN FMS King Cobra clutch B&M Ripper shifter FMS 3:55 gears EXHAUST Mac 1 5/8 Longtube headers with off-road H-pipe Dynomax SuperTurbo mufflers SUSPENSION Eibach progressive springs Ford Racing offset rack bushings Mac camber/caster plates new steering rack WMS X-track sub-frame connectors Tokico shocks and struts Maximum Motorsports LCA's Lakewood driveshaft safety loop |
||
__________________
Six out of seven dwarfs aren't Happy.. |
30 Jan 2003, 11:51 (Ref:490459) | #6 | ||
Racer
Join Date: Jan 2003
Posts: 180
|
Fast95 have you run it down the quarter? Must be good for high 11s low 12s.
|
||
|
30 Jan 2003, 11:54 (Ref:490462) | #7 | ||
Veteran
Join Date: Aug 2001
Posts: 565
|
My best 1/4 is 13.3/107 mph . The track at Calgary is 3600 ft above sea level . At a lower elevation and on slicks , I would expect low to mid 12's .
|
||
__________________
Six out of seven dwarfs aren't Happy.. |
30 Jan 2003, 17:45 (Ref:490840) | #8 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
XR2iT
|
||
__________________
Cowspeed |
30 Jan 2003, 17:49 (Ref:490845) | #9 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
XR2iT
S2 RS turbo engine with Bayjoo chip Quaife 5sp SC g/box and ATB Bilstein coil overs on front Leda adj on back Saxo PAS Runs on 15" slicks |
||
__________________
Cowspeed |
30 Jan 2003, 23:10 (Ref:491123) | #10 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
so thats why u asked about my XR2i!
Bayjoo! was that from Castle Performance ? how much hp it produce ? |
||
|
31 Jan 2003, 00:26 (Ref:491184) | #11 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
Don't know about the horses but I reckon about 180BHP. I have to run a 34mm restrictor. I got the chip from Burton
|
||
__________________
Cowspeed |
31 Jan 2003, 10:13 (Ref:491563) | #12 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
ah right, a race car.
|
||
|
31 Jan 2003, 12:12 (Ref:491730) | #13 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
No it is road legal. It is a rally car but I do drive it on the road with MOT, tax and insurance.
|
||
__________________
Cowspeed |
31 Jan 2003, 14:39 (Ref:491886) | #14 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
ok here's mine
1994 Ford XR2i 1.8 16v Zetec engine: superchips module + 10 bhp Pipercross free flow induction kit Powerflow S/S exhaust Mafco pro ignition leads Splitfire spark plugs brakes: Black diamond ventillated, cross drilled and grooved front disks Mintex fast road pads misc: uprated Black Diamond clutch bodywork: rear roof spoiler rear boot spoiler blue mhw rear lens cluster blue oval side repeaters security: cat 1 alarm/immobiliser - with remote CL a second immobiliser alarm pager system hope ive not missed anything |
||
|
31 Jan 2003, 18:27 (Ref:492113) | #15 | ||
Veteran
Join Date: Oct 2002
Posts: 1,618
|
yes but it isn't complete yet so just wait...It will be a CRX with a rear engine
|
||
__________________
I refuse to let fact get in the way of my opinion |
1 Feb 2003, 00:39 (Ref:492500) | #16 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
cool, some of my mates had CRX's
|
||
|
1 Feb 2003, 23:58 (Ref:493345) | #17 | ||
Racer
Join Date: Dec 2002
Posts: 338
|
1973 Corolla
1.5L motor (up from 1.2L) Factory twin carbs Biggish cam (8000rpm +. It goes off the tacho ) Extractors & 2" exhaust 4 speed locked 4.77 diff lowered and modified suspension stripped interior custom paint Shame its not registered Here is a pic |
||
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees............... |
2 Feb 2003, 15:52 (Ref:493846) | #18 | |||
Veteran
Join Date: Jan 2003
Posts: 747
|
Quote:
|
|||
__________________
Lend me your brain I am building an idiot. |
2 Feb 2003, 18:47 (Ref:493982) | #19 | |||
Veteran
Join Date: Feb 2002
Posts: 561
|
Quote:
|
|||
__________________
Cowspeed |
2 Feb 2003, 20:19 (Ref:494067) | #20 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
In my opinion a waste of money. ford ones are good enough.
I couldn't say what impact the Mafco Pro leads made because i added them with the spark plugs at the same time. It seemed to produce a tiny amount of performance. I was going to get Splitfire twin core leads but the garage i was getting everything from recommended Mafco instead, even though they were about 5 times cheaper. Why not fit Sierra cossy ones. easy mod. I didnt know they could be fitted. really! the spoilers were already on when i bought it and i dont think they are too big or OTT or anything, infact I like them. As for the blue bits, well thats just to be different and look much better in my opinion. heres my car on the rolling road (not a very good pic tho) Last edited by woodyracing; 2 Feb 2003 at 20:22. |
||
|
2 Feb 2003, 23:27 (Ref:494335) | #21 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
The blue bits do seem strange to me but then i am old and a bit of a fuddy duddy i.e. If it doesn't help performance then I won't spend money on it.
The cossy brakes were on the car when I bought it but all it seems to be are double ended bolts with spacers. the lugs are the same. I can get the rears off the ground. How is the handling because I found mine to be the car from hell!. I am fitting PAS at the moment and I am spending lots of money to get the car driveable. |
||
__________________
Cowspeed |
3 Feb 2003, 00:14 (Ref:494386) | #22 | ||
Veteran
Join Date: Mar 2001
Posts: 2,204
|
>>hows the handling?
seems ok to me, mine has PAS but its still a bit heavy. Theres no body roll or anything, but the bonnet dips or rises more than i'd really like when accelerating or braking. Seems a bit slippy round fast motorway bends in the rain too, but i always blamed my tyres. |
||
|
3 Feb 2003, 01:56 (Ref:494466) | #23 | |||
Racer
Join Date: Dec 2002
Posts: 338
|
Quote:
|
|||
__________________
Think drifting is tough. Try it on gravel, in the dark, amonst trees............... |
3 Feb 2003, 09:37 (Ref:494630) | #24 | |||
Veteran
Join Date: Jan 2003
Posts: 747
|
Quote:
|
|||
__________________
Lend me your brain I am building an idiot. |
3 Feb 2003, 11:22 (Ref:494701) | #25 | ||
Veteran
Join Date: Feb 2002
Posts: 561
|
Thought I would show you a pic of my baby.
|
||
__________________
Cowspeed |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Modified cars | nickyf1 | Road Car Forum | 47 | 9 Sep 2006 07:56 |
Modified Concept Car | Roundy Mooney | Rallying & Rallycross | 62 | 25 Nov 2004 18:43 |
BAR to use modified F.T.T. | T0MAT01 | Formula One | 10 | 12 Sep 2004 08:30 |
Modified Saloons No More? | Peter Mallett | National & Club Racing | 31 | 11 Aug 2004 13:42 |
Modified Cars | Hobson | Road Car Forum | 47 | 5 Nov 2001 10:38 |