Engine problems at Ford...

[fast95pony]

http://www.blueovalnews.com/2004/pl...ive07sept04.htm

07 September 2004
Dearborn, Michigan.
Robert Lane

Sources at one of Ford's engine plants told BlueOvalNews that Ford Motor Company has instructed assembly plants to stop shipping certain 2005 model year vehicles because they can contain defective 4.6L or 5.4L engines. BlueOvalNews was first altered to the problem after we received a news tip at the end of August.

The products that can contain the defective engines include the 2005 Ford Mustang GT, 2005 F-Series, 2005 F-Series Super Duty, Ford Expedition and Lincoln Navigator. Ford has instructed the assembly plants to stop shipping vehicles until they are screened to see if they contain the defective engines. It is not known if any products were shipped to consumers before the problem was noticed.

The 2005 model year 4.6L and 5.4L engines in question were built with defective cylinder heads. According to sources, the defective cylinder heads will have an adverse effect on performance and will cause the engine to fail to meet Ford's specifications.

It's not immediately clear if Ford will replace the entire engine at the assembly plant or just replace the defective cylinder heads and approve the vehicle for shipment to customers.

A Team Mustang source told BlueOvalNews that a stop shipment order means that Ford won't ship GT Mustangs to dealers, but it doesn't mean that Ford will stop building Mustangs - they can still build V6 powered models until problems with the 4.6L engines are corrected. Further, even though Ford officially launched JOB1 of the Mustang today, shipments don't occur immediately. "Somewhere within two weeks after Job #1 we have an OK to ship meeting where all the upper management on the program proclaim the vehicle is OK to ship. . . .launching a new vehicle in a new plant can have its issues. That's just part of what a launch is all about.", said our source.

In what could prove to be the most devesting news; however, is that the Ford GT "40" is alleged to have cylinder heads that contain defects in the combustion chamber pocket area. According to sources, Ford is allegedly making design changes to the cylinder head and will create a new casting which is targeted for release by 01 January 2005. Rather than issue a recall for the Ford GT, Ford would most likely issue a TSB (technical service bulletin) and repair the vehicles only as needed. Look for an update on the GT heads at a later date.

[kingfloopy]

This isn't the first time that Ford has had problems in engine manufacturing. A few years ago a large number of trucks had engines that had a lot of problems from the machining process. The early model Windstar vans had severe engine problems too. Ford generally seems to refuse to do anything about these problems once the vehicles are sold even if they effect a large number of people. I guess quality isn't Job #1 any more.

J.D.