|
| Site Partners: | SpotterGuides | Veloce Books |
| Related Sites: | Baltic Touring Car Championship | Your Link Here |
|
|
||||||||||
|
|||||||||||
|
|
||||||||||
|
|||||||||||
|
|
26 Oct 2008, 21:25 (Ref:2321318)
|
#1 | ||
|
Veteran
Join Date: Jun 2004
Posts: 3,153
 |
BMW Homologation question
BMW's 3-serie got a facelift this year. Is BMW allowed to put these new details (like the grille on the front and the new rearlights) on the S2000 320si without any problems? Or do they require re-homologation? And in that case, do they have to build another 2500 examples of their facelifted car with the adapted engine? Or can they keep on using the 'si' engine because it was produced in the pre-facelift 320si, like Chevy running the Opel engine?
|
||
|
|
|
26 Oct 2008, 21:43 (Ref:2321338)
|
#2 | |
|
Veteran
Join Date: Feb 1999
Posts: 8,964
 |
If there's no difference to the base car other than detailing then there's no need to re-homologate. They may need to create a new 'S2000 kit variant' but that wouldn't require another 2500 build-run.
|
|
|
|
|
|
26 Oct 2008, 22:07 (Ref:2321357)
|
#3 | ||
|
Veteran
Join Date: Jun 2004
Posts: 3,153
|
Ah, so they can get away with just homologating the new parts?
|
||
|
|
|
|
26 Oct 2008, 22:13 (Ref:2321362)
|
#4 | |||
|
Veteran
Join Date: Jan 2001
Posts: 1,084
|
Quote:
I don't think any homologation is required for asthetic changes to the car |
|||
|
|
__________________
Real men don't use "clients", real men whistle SYN/ACK down the phone
|
|
26 Oct 2008, 22:21 (Ref:2321367)
|
#5 | ||
|
Subscriber
Veteran
Join Date: Jul 2000
Posts: 2,615
|
The changes on the facelift is headlights (inside) rearlights, bonnet, rearviewmirrors and the trunk. No major stuff, the S2000-kit can remain the same.
|
||
|
|
|
26 Oct 2008, 23:15 (Ref:2321398)
|
#6 | |
|
Racer
Join Date: Dec 2007
Posts: 216
|
I was under the impression that the front bumper is different!
 No? |
|
|
|
|
|
27 Oct 2008, 12:42 (Ref:2321766)
|
#7 | ||
|
Veteran
Join Date: Apr 2002
Posts: 2,594
|
Front bumper is different (surfacing under kindney and above main air intake), but its sutle
Probably OK and allowed to modify above axle line in this case (I believe they are allowed below axle line). If you look at SEAT's various Leon bumpers, they have changed quite a few times over the years and they dont really look like the real thing |
||
|
|
__________________
---> 2017 Spotter Guides - Le Mans live from 10th June! IMSA WeatherTech, Continental, Porsche GT3 Cup USA, Canada, Lamborghini Super Trofeo NA and Europe also available<---
|
|
27 Oct 2008, 12:51 (Ref:2321776)
|
#8 | ||
|
Veteran
Join Date: May 2006
Posts: 1,706
|
As I learned from reading the forum on the Btcc-website, the ugly but no doubt aerodynamic front-bumper of the Vauxhall Vectra needed to be homologated, and therefore were produced and fitted to a lot of Vectra's. Alan Gow had no doubt though that the large majority of those bumpers were removed after inspection and changed for the regular bumper...
|
||
|
|
|
|
27 Oct 2008, 12:54 (Ref:2321779)
|
#9 | ||
|
Veteran
Join Date: Apr 2002
Posts: 2,594
|
in the super touring days, it was all about below and above axle height. Below you could change etc. Above you couldn't. If you look at the current crop (save Vauxhall), they all adhere to this principle, although SEAT does have it smoothed over.
Now the Vectra picnic shelf on the bumper is (IIRC) above the axle line, so maybe thats why they needed to homologate that. I dont every remember SEAT having to produce three different versions of their front bumper |
||
|
|
__________________
---> 2017 Spotter Guides - Le Mans live from 10th June! IMSA WeatherTech, Continental, Porsche GT3 Cup USA, Canada, Lamborghini Super Trofeo NA and Europe also available<---
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Homologation Papers | GBRM | Historic Racing Today | 16 | 19 Sep 2008 10:43 |
| GT1 engine homologation for LMP1 rule question. | chernaudi | Sportscar & GT Racing | 27 | 24 Mar 2008 18:05 |
| Homologation | Marbot | Formula One | 14 | 18 May 2006 05:29 |
| The Homologation Process | skycafe | Sportscar & GT Racing | 25 | 17 Mar 2005 17:41 |
| Question about BMW M3s in ALMS | Heeltoe6 | North American Racing | 2 | 17 Jan 2001 18:24 |
Linear Mode
