HELP LASER HD86

[rayspeed]

Hi guys I have a laser hd86 I am trying to get in race trim to help make up the grid. I am stugling to find out what the rear wheel bearing assemblys was made for. The seals has an skf number on them and that it came from a fiat panda but The spines for the drive shafts are to small , has any one used and maintained a laser 86? hope some one can help cheers PETER HANNAM

[diz]

Originally Posted by rayspeed

Hi guys I have a laser hd86 I am trying to get in race trim to help make up the grid. I am stugling to find out what the rear wheel bearing assemblys was made for. The seals has an skf number on them and that it came from a fiat panda but The spines for the drive shafts are to small , has any one used and maintained a laser 86? hope some one can help cheers PETER HANNAM

Hi Pete
If you get it race ready and venture north from sunny Devon, don't forget my ooh argh cream tea.
Cheers
Diz

[Thundersports]

Same as the Mondiale from that era you need to have the thing machined.

[rayspeed]

Hi thanks for that info, looks like it my be scraped as the car is not worth spending that amount of money cheers

[Thundersports]

Originally Posted by rayspeed

Hi thanks for that info, looks like it my be scraped as the car is not worth spending that amount of money cheers

Don't do that i'll send you a pm of someone who can help......
Ps is it an ex George McGlashen car?

[Jon Davis]

Iain Houston runs an 87 Laser down at Castle Coombe, I used to sprint against him back in the day and he is a very approacable chap . . . also there is an old post which may be worth checking out.

http://tentenths.com/forum/showthread.php?t=101726

[SAMD]

I know a guy who has an 86 Mondial (if these are the same) but he just buys everything he needs from Mondial. You may be able to go that route.